Service Manual

SPECIFICATIONS
2-2 Z580/Z589 DFI Z Master Service Manual
2
Electrical
Mowing Deck
60” (152.4cm) 72” (182.8cm)
Type Turbo Force™ Turbo Force™
Deck Construction Fabricated, 7-gauge high-strength
steel
Fabricated, 7-gauge high-strength
steel
Deck Depth 5-1/2” (13.97cm) 5-1/2” (13.97cm)
Adjustable Discharge Bafe Standard Standard
Spindle Housings Reinforced cast iron Reinforced cast iron
Spindle Shaft / Bearings 1” (2.54cm) Steel shaft/tapered roller
bearings
1” (2.54cm) Steel shaft/tapered roller
bearings
Blade Tip Speed 18,500 ft/min (5,638.8 meters/min) at
high idle
18,500 ft/min (5,638.8 meters/min) at
high idle
Height of Cut 1.5” - 5” in .25” increments
(3.81 - 12.7cm in .635cm increments)
1.5” - 5” in .25” increments
(3.81 - 12.7cm in .635cm increments)
Anti-Scalp Rollers 6 Adjustable 6 Adjustable
Engine Charging Coil 40 Amp
Voltage 12 volt, negative ground
Battery BCI group 26, 540 CCA
Gauges and Alarms • Top panel mounted hour meter
• Audio alarm for excess engine temperature
• Lighted indicators for engine malfunction and excess engine temperature
• Push/pull PTO switch
Fuses Blade type, 30 Amp ignition, 30 Amp cooling fan and 10 Amp engine