Service Manual

HYDRAULIC SYSTEM

4-39Z580/Z589 DFI Z Master Service Manual

Traction Pump Drive Belt Installation

1. Slide the traction pump drive belt over the electric

PTO clutch (Fig. 355).

11. Remove the traction pump drive belt from the pump

pulley. Lift up on the gearbox idler pulley and re-

move the belt by sliding it out around the electric

PTO clutch (Fig. 354).

Fig 355 PICT-3523a

Fig 354 PICT-3523a

2. While lifting up on the gearbox idler pulley, route the

traction pump drive belt around the pump pulley and

the engine pulley as shown (Fig. 356):

Fig 356 g. 110-6220