Service Manual

HYDRAULIC SYSTEM
4-4 Z580/Z589 DFI Z Master Service Manual
4
15. Remove the hose clamp located on the hydraulic
suction hose coming from the oil lter (Fig. 245).
17. Raise the rear of the unit and remove both right and
left rear tires.
18. Mark or tag the wheel motor hydraulic hoses and
ttings to ensure they are reconnected correctly.
19. Remove the two hydraulic hoses from the RH wheel
motor (Fig. 247).
Fig 245 PICT-3202a
Fig 247 PICT-3217a
20. Cap the hydraulic hoses and ttings (Fig. 248).
16. Remove the hydraulic suction hose from the tting
on top of the hydrostatic pump (Fig. 246).
Note: When removing hydraulic hoses from the
pump, cap the hose end and the tting on the
hydrostatic pump to ensure dirt and debris
does not enter the system.
Fig 248 PICT-3207a
Fig 246 PICT-3203a