Service Manual

4-9Z Master 500 Gas Series Service Manual

9. Remove the front two wheel motor bolts, lock

washers, spacers, and nuts (Fig. 125).

Fig 125 DSC-3076

10. Swing the brake linkage forward out of the way of

the wheel motor. It may be necessary to loosen the

back two bolts to remove the spacers (Fig. 126).

Fig 126 DSC-3077

12. For service work on the wheel motor refer to the

Parker/Ross Service Manual, Form #492-4753.

Fig 127 DSC-3078

11. Remove the back two bolts, lock washers, spacers,

and nuts and remove the wheel motor from the

frame (Fig. 127).

HYDRAULIC SYSTEM

Note: As a reminder, prior to connecting the

hydraulic lines, the O-rings should be

replaced with new ones and lightly lubricated

with petroleum jelly.

Wheel Motor Installation