Service Manual

4-8 Z Master 500 Gas Series Service Manual

HYDRAULIC SYSTEM

5. Remove the 3 bolts securing the brake band to the

actuator (Fig. 121).

Fig 121 DSC-3072

6. Remove the brake band from the hub (Fig. 122).

Fig 122 DSC-3073

Fig 124 DSC-3075

8. Clean any dirt or debris away from the hydraulic line

ttings. Remove the hydraulic lines.

Note: Make sure to cap the ttings and hoses

to prevent dirt from entering the hydraulic

system (Fig. 124).

Fig 123 DSC-3074

7. Install wheel puller on to the hub and remove the

hub from motor output shaft (Fig. 123).

Note: Toro Wheel Puller, P/N TOR 4097, is available

through SPX (formerly OTC) 1-800-533-0492.