Service Manual

3-16 Z Master 500 Gas Series Service Manual

CHASSIS

12. When removing the lift lever grip assembly, you may

experience interference with the RH oor pan hinge

or the front edge of the RH motion control plate, or

both (Fig. 073).

Fig 073 DSC-1657

13. If the lift lever grip assembly contacts the RH oor

pan hinge, loosen the RH oor pan hinge mounting

hardware. Push the RH hinge upward. Re-tighten

the RH oor pan hinge mounting hardware (Fig.

074).

Fig 074 DSC-1661

Fig 072 DSC-1656

11. Remove retainer clip from lift lever grip assembly

(Fig. 072).

14. If the lift lever grip assembly contacts the RH motion

control plate, tilt and hold the oor pan assembly

slightly forward. Move the RH motion control lever

out of the neutral lock position and push it in the full

forward position. Using a tie strap or wire, tie the

oor pan assembly to the motion control arm to hold

the oor pan assembly in place (Fig. 075).

Fig 075 DSC-1665

A. RH Floor pan hinge B. RH Motion control plate