Service Manual

3-9Z Master 500 Gas Series Service Manual
3
CHASSIS
5. Slide the brake shaft out of the frame pivot bushings
(Fig 049).
Fig 048 DSC-1620
4. Remove the brake shaft cotter pin (Fig. 048).
Fig 049 DSC-1621
6. Using a hammer and punch, drive both brake lever
control bearings from the brake pivot (Fig. 050).
Fig 050 DSC-1622
7. Inspect the brake shaft and bushings for excessive
wear. Replace any worn or broken components
(Fig. 051).
Fig 051 DSC-1623
A
B
C
A. Brake lever C. Cotter pin
B. Bushings