Service Manual

7-30 Z Master 500 Gas Series Service Manual
7
MOWER DECKS/PTO
8. Adjust the lift nuts on both the left and the right
side of the machine to achieve 1/4 to 3/8 inch (6 to
10mm) lower in front A than in the rear at B (Fig.
453).
Fig 453 g. 70 m-6831
1. 11-1/2” (29.2cm) 4. Front swivel
between the large 5. Swivel jam nut
washers 6. Lift nut
2. Front nut 7. Front support arm
3. Spring jam nut 8. Large washer
9. Tighten both swivel jam nuts against the front swivel
to lock the height.
10. Check to make sure there is equal tension on chains
and adjust again if needed.