Service Manual

7-23Z Master 500 Gas Series Service Manual
7
MOWER DECKS/PTO
14. Install the bearing shield (Fig. 434).
Fig 434 DSC-2705
15. Install the square key onto the spindle shaft (Fig.
435).
Fig 435 DSC-2706
Fig 437 DSC-2708
17. Install the heavy washer and nut on the top of the
spindle shaft (Fig. 437).
Note: The cup side of the washer should be facing
down toward the pulley hub.
Fig 436 DSC-2707
16. Install the pulley hub on the spindle shaft (Fig. 436).