Setup Instructions

7. Align the holes in the air cleaner brac k et with

holes in the v alv e co v ers ( Figure 24 ).

8. Install the long carburetor bolts into the

air cleaner base and into the carburetor

( Figure 23 ).

Figure 23

9. Install the hose clamp onto the hose and install

the hose to the air cleaner ( Figure 24 ).

10. Install the bolts into the bac k of the air cleaner

brac k et and into the motor ( Figure 24 ).

11. Tighten the hose clamp .

Figure 24

12. Install the front engine co v er with 4 screws .

Figure 25

Step

Checking the Spindles for

Grease

Parts needed for this step:

1 tube

Number 2 general purpose lithium base

or molybdenum base grease. (Purchase

separately.)

Procedure

1. R emo v e the belt co v ers on domestic mac hines

( Figure 26 ).

Figure 26

2. R emo v e the belt co v ers and bolts on

inter national mac hines ( Figure 27 ).