Service Manual

5-10 Z Master 500 Gas Series Service Manual
5
ENGINE
Fig 190 DSC-2983
12. Remove the 4 engine bolts, spring washers, and
nuts mounting the engine to the frame. There are
two ground wires located on the left front engine
mount bolt (Fig. 190).
Fig 189 DSC-2982
11. With a pry bar, relieve tension on the spring loaded
idler and remove the pump drive belt (Fig. 189).
Kawasaki Air-Cooled Engine
Installation
13. Connect a lift chain to the lift points on the engine.
Raise the engine from the frame (Fig. 191).
Fig 191 DSC-2984
1. Lower the engine to the frame of unit.
2. Install the engine with 4 mounting bolts, spring
washers, and nuts.