Service Manual

5-16 Z Master 500 Gas Series Service Manual

ENGINE

Fig 213 DSC-2901

15. Remove the ground cables located on the lower left

side of the base of the engine (Fig. 213). One bolt

goes into the side of the engine block and the other

is the engine mounting bolt and nut.

Fig 212 DSC-2895

Fig 214 DSC-2903

14. Remove the blue wire from the starter solenoid (Fig.

212).

16. Disconnect the engine harness connector from the

main wiring harness (Fig. 214).

Fig 211 DSC-2894

13. Remove the 3 red wires located at the starter

solenoid (Fig. 211).