Service Manual

3-11Z Master 500 Gas Series Service Manual

CHASSIS

Fig 055 DSC-1631

2. Install the 3 bolts, brake band retainer, brake band,

and spacers and tighten (Fig. 055).

3. Install tire assembly and the 4 wheel bolts.

1. Raise the rear end of the unit and remove the right

and left rear tires.

Note: To prevent the unit from rolling, block the two

front tires.

Brake Shaft Removal

Fig 056 DSC-3100

3. On the right side remove the clevis spring clip from

the brake shaft (Fig. 057).

Fig 057 DSC-3101

2. On the left side of the machine, remove both clevis

spring pins, one from the brake rod and the other

from the brake shaft (Fig. 056).