Service Manual
3-6 Z Master 500 Gas Series Service Manual
3
Fuel Tank Removal
4. Pack both tapered wheel bearings. Reassemble
per Fig. 036. Pump grease into the wheel bearings
through the grease îš¿tting located on the rim (Fig.
037).
Fig 038 DSC-3091
1. Disconnect the negative battery cable from the
battery. Drain the fuel tanks.
2. Remove the fuel hose clamp at the bottom of the
fuel tank (Fig. 038).
Fig 037 DSC-1547
Left Side Fuel Tank Removal
3. Remove the 4 screws retaining the control panel and
control panel shield to the tank (Fig. 039).
Fig 039 DSC-3092
4. Carefully remove the control panel and control panel
shield by lifting the panel and sliding toward the
middle of the unit.
Note: DO NOT disconnect any cables or wiring.
5. Remove the bolt, lock washer, and nut located under
the front of the fuel tank (Fig. 040).
CHASSIS
Fig 040 DSC-3094