Service Manual

5-32 Z Master 500 Gas Series Service Manual

29. Unplug the black and white wiring connector from

the wiring harness located on the right front side of

the engine (Fig. 276).

Note: The other two wiring connectors do not need

to be disconnected.

Fig 276 DSC-2832

ENGINE

Fig 275 DSC-3164

28. Remove the 3 red wires from the starter solenoid

(Fig. 275).

Fig 274 DSC-3163

27. Unplug the orange/black wire to the starter solenoid

(Fig. 274).

26. Remove the three engine ground cables located on

the lower right rear of the engine (Fig. 273).

Fig 273 DSC-2829