Service Manual

7-18 Z Master 500 Gas Series Service Manual
7
MOWER DECKS/PTO
Fig 415 DSC-2678
Fig 417 DSC-2680
10. Remove the split ring (Fig. 415).
12. Remove the tapered roller bearing from the bottom
of the spindle assembly (Fig. 417).
Fig 416 DSC-2679
Fig 414 DSC-2677
11. Turn the spindle housing over and remove the oil
seal from the bottom of the spindle housing (Fig.
416). Note the orientation of the lower oil seal. The
open end of the seal faces outwards to help relieve
pressure from over-greasing the spindle assembly.
9. Remove the spindle spacer (Fig. 414).