Service Manual

CHASSIS
5 - 14 Mid-Mount Z Service Manual
10. Pack the bearing with grease and install it on the
race (Figure 105).
Figure 105
1030-025
11. Press a new bearing seal into the hub (Figure
106).
Figure 106
1030-027
12. Reverse steps 1-4 to reassemble.
Front Caster Bearings - Remove & Replace
1. Remove the dust cap at the top of the caster
assembly (Figure 107).
Figure 107
1030-011
2. Hold the caster assembly stationary and loosen
the bearing adjustment nut (Figure 108).
Figure 108
1030-010
3. Remove the bearing adjuster nut while holding the
caster assembly.
4. Remove the upper caster bearing.
5. Pry the lower bearing seal out of the housing and
remove the lower bearing.