Operator's Manual

Operation
28
Positioning the Seat
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
1. To adjust, move the lever sideways to unlock
seat (Fig. 13).
2. Slide the seat to the desired position and release
lever to lock in position.
1
1200
m–3655
Figure 13
1. Adjustment knob
Pushing the Machine by Hand
IMPORTANT: Always push the machine by
hand. Never tow the machine because
hydraulic damage may occur.
To Push the Machine
1. Disengage the power take off (PTO) and turn the
ignition key to “OFF” to stop the engine. Move
controllers to neutral locked position and apply
parking brake.
2.
Rotate the by-pass valves counterclockwise 1
turn to push. This allows hydraulic fluid to
by-pass the pump enabling the wheels to turn
(Fig. 14).
IMPORTANT: Rotate by-pass valves a
maximum of 2 turns so the valves do not
come out of the body causing fluid to run out.
3. Disengage parking brake before pushing.
To Operate the Machine
1. Rotate the by-pass valves clockwise 1 turn to
operate machine (Fig. 14).
Note: The machine will not drive unless
by-pass valves are turned in.
1
E
Figure 14
1. By-pass valve