Service Manual

ZT-4400 19
FILTER AND FILTER COVER
RefertoFigure11
Disassembly
1. Removetheltercover(102).
2. Remove the O-ring (101) from the cover
(102) and discard.
3. Removethelter(100)anddiscard.
Inspection
1. Inspect all parts for wear or damage. Re-
place as necessary.
2. Checkfor oldltergrommet stuckon the
ltertube.Removeifpresent.
Assembly
1. Installthenewlter(100).
2. Install the new O-ring (101) onto the cover
(102).
3. Installtheltercover(102).Refertotorque
chart on page 15.
Figure 11, Filter and Filter Cover
102
101
100