Service Manual

28 ZT-4400
19
18
CENTER SECTION
Figure 21, Center Section
RefertoFigure21,and22
Disassembly
1. Remove all external items previously
discussed in their recommended order.
2. Remove the center section bolts (18) and
(19).
Inspection
1. Inspect for surface wear damage.
Assembly
1. Reassemble all parts in the reverse order
of disassembly.
2. When tightening the fasteners, refer to the
table on page 15 for the required torque
values.Seegure22fororderofboltinstal-
lation.
Figure 22, Center Section Bolt
Installation Torque Sequence