Operator's Manual

9.For60-inchmowerdecksonly:
A.Raisethedecktothetransportposition
(140mmor5-1/2inches).
B.Slowlyloosentheadjustingscrewonthe
lift-assistspringuntilyoucanremovethe
screw(Figure81).
Note:Savethescrewforinstallation.
g334850
Figure81
1.Adjustingscrew
3.Setthegapto22to29
mm(7/8to1-1/8inches).
2.Bracket
10.Place2blocks(seeBlockHeightandRake
Table)undertherearedgeofthecuttingdeck
skirt;1oneachsideofthecuttingdeck(Figure
82).
11.Settheheight-of-cutlevertothe76mm(3
inches)position.
12.Place2blocksundereachsideofthefrontedge
ofthedeck,butnotundertheanti-scalproller
bracketsorwelds.
g038090
Figure82
Bottomview
1.Block—73mm(2-7/8
inches)
2.Welds
BlockHeightandRakeTable
Deck
Size
FrontBlockHeightRake
Allmower
decks
73mm(2-7/8inches)4.8to6.4mm(3/16to1/4
inch)
13.Carefullyrotatethebladessidetoside(Figure
79).
14.Loosenthelocknuts(Figure83)onall4corners
andensurethatthemowerdeckissitting
securelyonall4blocks.
15.Removeanyslackfromthedeckhangersand
makesurethedeck-liftfootleverispushedback
againstthestop.
16.Tightenthe4locknuts.
g035851
Figure83
1.Locknuts3.Deckhanger
2.Deckliftarm4.Chain
60