Service Manual

CHASSIS
5xi Series Tractor Hydraulic Service Manual 6 - 25
6
Check the bushing (A) making sure it is centered
in the slot in the brake pivot plate (B). If the
bushing contacts the sides of the slot, loosen jam
nuts (G), and turn the link until the bushing is
centered in the slot.
Tighten the rear jam nut first. Hold the front rod
end fitting while tightening the front jam nut.
IMPORTANT: There must be axial looseness in
the rod (A) or there may be binding in the pedal
linkages.
Test the adjustment by cycling the brake. The
slot should travel over bushing (A) without
touching.
0144-089
7233-073
0144-089