Service Manual

MAINTENANCE
5xi Series Tractor Hydraulic Service Manual 1 - 13
1c
1. Place the rear axle on jack stands, and
remove the rear wheels.
NOTE: Do not set the parking brake.
2. Bring the hydrostatic transmission up to
operating temperature (at least 15 minutes’
operation). The neutral eccentric is
accessed through the hole indicated by the
arrow.
3. To gain access to the adjustment eccentric,
turn the front wheels in either direction to the
steering stop. This causes the linkage rod to
move up, out of the way.
4. Loosen the through bolt just enough to allow
rotation of the eccentric (A).
3653-006
0144-072
0144-072
Adjustment Procedure