Service Manual

7 - 4 5xi Series Tractor Hydraulic Service Manual
HYDROSTATIC DRIVE
7
Attach a puller and tighten the forcing screw to
remove the hubs.
Remove the woodruff key and washer. File
smooth any burrs caused by the set screws and
axle keys. These may cause damage to the
needle bearings if not removed before
disassembly.
Replace the axle seals after reassembly.
NOTE: Use seal bullet or other cover over
keyway when installing new seal.
Remove the bolts securing the brake band.
Replace the brake band if lining is excessively
worn, glazed, or cracked.
3095-014
3095-015
3095-018