Service Manual

CHASSIS
5xi Series Tractor Hydraulic Service Manual 6 - 29
6
Install the brake and motion control pedals.
Test to make sure the fuel vent system is
functioning properly before and after repairs
involving removal of the rear fender.
1. Modify a carburetor needle and seat tester
by installing a 3/8” (3.17mm) copper tube at
the discharge side of the tester.
2. Connect the test gauge to the vent hose and
pressurize to 7 - 14 psi (.5 - 1 bar). The
pressure should drop to “0” in one second or
less.
0109-003 / 0109-020
0202-029
0202-029