Service Manual

8 - 20 5xi Series Tractor Hydraulic Service Manual
HYDRAULIC SYSTEMS
8
Lubricate and install the dust seal, see drawing
for correct seal orientation.
(A) Dust Seal
(B) Thrust Bearing and
Race (2)
(C) Quad Seal
Install the centering springs in the spool. It is
best to install the two flat pieces first. Next,
install the curved pieces, three at a time.
Fit the retaining ring over the centering springs.
Centering Spring Kit Part Number: 94-4095.
Apply a light coating of 10W-30 oil to the spool
(A) and slide it into the sleeve (B). Be sure the
centering springs fit into the notches (C) in the
sleeve.
Install the pin (D).
0202-044
3605-025
3605-030