Service Manual

7 - 22 5xi Series Tractor Hydraulic Service Manual
HYDROSTATIC DRIVE
7
Install snap rings to input shaft and charge pump
housing.
Install two buttons (A) in cover.
Install cam ring insert, with hole away from cam
ring.
Align cam ring with control shaft pin and cam ring
pivot pin.
Install the small rotor into the pump housing.
Leave the rubber band in place until the rotor is
in place.
Rotate the rotor until the slot in the rotor is
aligned with the input shaft and the rotor drops in
place.
Apply oil liberally to all components.
3094-084
0202-036
3095-112