Service Manual

ENGINE

4-4 Toro Z Master G3 3000/5000/6000 Series Service Manual

15. Remove the bolt, spring washers, and washer

retaining the electric PTO to the engine crankshaft

(Fig. 232). Slide the clutch off the crankshaft.

Fig. 232 DSCN-0031a

16. Remove the engine sheave from the engine

crankshaft (Fig. 233).

Fig. 233 DSCN-0032a

Fig. 231 DSCN-0028a

14. Unplug the wire plug from the electric PTO clutch

(Fig. 231).

13. Using a 1/2” drive breaker bar installed in the square

hole in the pump idler assembly, rotate the pump

idler arm counter-clockwise to relieve tension on the

v-belt (Fig. 230). Remove the v-belt from around the

engine drive pulley.

Fig. 230 DSCN-0025a