Service Manual

CHASSIS

3-51Toro Z Master G3 3000/5000/6000 Series Service Manual

Motion Control Damper Replacement

Note: There is a right and left motion control

damper. The following removal and installa

tion procedures are on the left damper. The

procedure is the same for the right damper.

Motion Control Damper Removal

1. Park the machine on a level surface, disengage the

PTO, turn the ignition OFF and remove the key.

2. Remove the nut securing the damper ball joint to the

frame.

Note: You will need a T40 Torx wrench to hold the

bolt while removing (Fig. 182).

Fig. 182 DSCN-4445a

Fig. 183 DSCN-4448a

4. Remove the damper assembly (Fig. 184).

Fig. 184 DSCN-4450a

3. Remove the nut securing the damper to the motion

control assembly (Fig. 183).