Service Manual

MOWER DECKS
6-21Toro Z Master G3 3000/5000/6000 Series Service Manual
6
3. Install the spacer in the spindle housing (Fig. 447).
Fig. 447 DSCN-0116a
4. Turn the spindle housing over and press the bearing
in the bottom of the housing until the bearing seats
against the spacer (Fig. 448).
Fig. 448 DSCN-0111a
Note: The open lip of the seal should be facing
outward (Fig. 449).
Fig. 449 DSCN-0112a