Service Manual

MOWER DECKS

6-12 Toro Z Master G3 3000/5000/6000 Series Service Manual

Mower Spindle Assembly (2009 Model

G3 Series Units)

14. Remove the large spacer in the spindle housing (Fig.

415).

1. Install the spacer through the top of the spindle

housing (Fig. 417).

Fig. 415 DSCN-2682a

15. This view shows the 2 bearing races and the large

spacer in the spindle housing (Fig. 416).

A. Brearing race spacer B. Center spacer

Fig. 416 DSCN-2684a

Fig. 417 DSCN-2688a

2. Using a press, install the upper bearing race into the

spindle housing (Fig. 418).

Note: The wider inside diameter of the bearing race

should be facing up to accept the tapered

bearing.

Fig. 418 DSCN-2689a