Service Manual

CHASSIS
3-31Toro Z Master G3 3000/5000/6000 Series Service Manual
3
8. Route the brake cable behind the wheel hub and
slide the threaded end into the trunnion on the
caliper (Fig. 114).
7. Install the right hand brake cable retainer into the
cradle so that the retainer tab is installed in the slot
on the cradle (Fig. 113).
Fig. 113 PICT-9111a
Fig. 114 PICT-9113a
Fig. 115 PICT-9114a
10. Install a standard nut and a lock nut onto the
threaded brake cable rod (Fig. 116).
A. Standard nut B. Lock nut
Fig. 116 PICT-9075a
9. Install the snap tting into the slotted bracket (Fig.
115).
11. Adjust the park brake. Refer to “Adjusting the
Parking Brake” on page 3-32.
A B