Service Manual

HYDRAULIC SYSTEM

5-9Toro Z Master G3 3000/5000/6000 Series Service Manual

G3 UHT Transmission Installation (2009 -

2011 models)

1. Using the top 2 bolts as guides, position the UHT

into the cradle and slide the unit onto the 2 bolts

(Fig. 293).

Note: Be careful not to damage the UHT drive

pulley. Make sure the dump valve is in the

closed (horizontal) position.

3. Lift the UHT/cradle assembly up to the frame with

a oor jack. Align the UHT mounting holes with the

holes in the frame (Fig. 295). On the opposite side,

ensure the cradle mounting holes align with the

mounting holes on the UHT (Fig. 296).

Fig. 293 PICT-8629a

2. Loosely install a nut onto each of the bolts securing

the UHT to the cradle (Fig. 294).

Fig. 294 PICT-8631a

Fig. 295 PICT-8633a

Fig. 296 PICT-8637a