Service Manual

MOWER DECKS

7-58 Z580/Z593/Z595 Diesel Service Manual

2. Tighten the jam nut to secure the balljoint position

(Fig. 900).

Note: Balljoint to be positioned perpendicular to

strut.

Fig 900 PICT-4119a

3. Install 2 grease ﬁ ttings into the strut (Fig. 901).

Fig 901 PICT-4116a

Strut Installation

13. Remove the balljoint and jam nut from the strut (Fig.

898).

A. Strut C. Balljoint

B. Jam nut D. 17.31” (43.97cm)

Fig 898 PICT-4121a

1. Install the balljoint and jam nut into the strut. The

length of the strut should be 17.31” (43.97cm) from

the center of the balljoint to the center of the cross

shaft of the strut (Fig. 899).

Fig 899 ﬁ g. 108-5969