Operator's Manual

Figure 24

1. Adjustment knob

Using the Headlights

T he headlights are tur ned on with a se parate position,

lights , of the ignition switc h ( Figure 25 ). T he lights are

on while the ignition switc h is in the lights position

ev en with the engine off . R emo v e the k ey when the

mac hine is left unattended so lights can not be tur ned

or disc harging the batter y .

Figure 25

1. Lights

Positioning the Tilt Steering

Wheel

T he steering wheel has four tilt locations . P osition the

steering wheel where y ou ha v e the best control of the

mac hine and are most comfor table .

1. Lift the tilt lev er to release the loc k ( Figure 26 ).

2. Mo v e the steering wheel to a comfor table position;

then release the lev er to loc k.

Figure 26

1. Tilt lever 2. Steering wheel

Pushing the Machine by

Hand

Important: Al w ays push the machine by hand.

Nev er to w the machine because transaxle dama ge

may occur .

To Push the Machine

1. Diseng ag e the po w er tak e off (PTO) and tur n the

ignition k ey to off .

2. Mo v e the dri v e control rod to the push position.

T his diseng ag es the dri v e system and allo ws the

wheels to tur n freely ( Figure 27 ).

To Operate the Machine

Mo v e the dri v e control rod to the operate position

( Figure 27 ).

Note: T he mac hine will not dri v e unless the dri v e

control rod is in the operate position.