Service Manual

Fig.39
1
Fig.36
135
134
133
132
131
140
Tightening torque
21.6±0.98Nm
Tightening torque
6.86±0.98Nm
138
139
35.Install spring(134), sleeve(132) and spool
(133) into pump body(100). [Fig.36, Fig.37]
36.Install solenoid cmp(135) into pump body
(100). [Fig.36, Fig.37]
37.Install filter(119) into pump body(100).
[Fig.38]
38.KPS-18T Assembly(1) [Fig.39]
*Put clean oil on the contact surfaces of sleeve
(132) and spool(133).
*When installing, take care of the direction of
sleeve(132) and spool(133) and coil(141).
141
Solenoid cmp , Complete of assembly
12
Fig.38
100
119
Fig.37
take care of
the direction.