Service Manual

GLOSSARY
Demystification Glossary 3 - 21
Switch, Light
Figure 33 mvc-108
Purpose
This rocker switch is typically used to provide switching
for the lights (Figure 33).
How it Works
The switch has contacts inside which connect two
terminals in one position while disconnecting the other
two. The rating on the switch is 20 amp capacity at 12
volts.
Testing
1. Disconnect the switch from the wiring harness.
2. Using a VOM or test lamp, test the continuity of
the terminals, using the diagrams below (Figure
34).
Figure 34
mvc162art
“OFF” Position no
continuity
“ON” Position
continuity between
terminals 2-3 / 5-6
Glossary