Service Manual

3Tuff Torq Model K61A Hydrostatic Transaxle Safety Information
Safety Information
This symbol means WARNING or
PERSONAL SAFETY INSTRUCTION—
read the instruction because it has to do
with y our safety. Failure to comply with
the instruction may result in personal
injury or even death.
This manual is intended as a service and repair manual
only. The s afety instructions provided herein are for
troubleshooting, service, and repair of the Tuff Torq
model K61A hydrostatic transaxle. The tractor and
attachment operator’s manuals contain safety information
and operating tips for safe operating practices. Operator’s
manuals are available through your local Toro distributor
or:
The Toro Company
Publications Department
8111 Lyndale Avenue South
Bloomington, MN 55420--1196
Think Safety First
Avoid unexpected starting of engine...
Always turn off the engine and disconnect the spark plug
wire(s) before cleaning, adjusting, or repair.
Avoid injury from high pressure oil...
Keep body and hands away from pin hole leaks or
nozzles that eject high pressure oil. Use cardboard or
paper to locate hydraulic leaks. Oil escaping under high
pressure can penetrate the skin and cause injury. Oil
accidentally injected into the skin must be surgically
removed within a few hours by a doctor familiar with this
form of injury or gangrene may result.
Avoid laceration and amputations...
Stay clear of all moving parts whenever the engine is
running. Tr eat all normally moving parts as if they were
moving whenever the engine is running or has the
potential to start.
Avoid burns...
Do not touch the engine, muffler, or other components
which may increase in temperature during operation,
while the unit is running or shortly after it has been
running.
Avoid fires and explosions...
Avoid spilling fuel and never smoke while working with
any type of fuel or lubricant. Wipe up any spilled fuel or
oil immediately. Never remove the fuel cap or add fuel
when the engine is running. Always use approved,
labeled containers for storing or transporting fuel and
lubricants.
Avoid asphyxiation...
Never operate an engine in a confined area without
proper ventilation.
Avoid injury from batteries...
Battery acid is poisonous and can cause burns. Avoid
contact with skin, eyes, and clothing. Battery gases can
explode. Keep cigarettes, sparks, and flames away from
the battery.
Avoid injury due to inferior parts...
Use only original equipment parts to ensure that
important safety criteria are met.
Avoid injury t o bystanders...
Always clear the area of bystanders before starting or
testing powered equipment.
Avoid injury due to projectiles...
Always clear the area of sticks, rocks, or any other debris
that could be picked up and thrown by the powered
equipment.
Avoid modifications...
Never alter or modify any part unless it is a factory
approved procedure.
Avoid unsafe operation...
Always test the safety interlock system after making
adjustments or repairs on the machine.