Service Manual

5-24
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
Table of Contents
CHASSIS
Seat (Cont.)
Installation
NOTE: Assistance will be needed.
1. Place the seat on the machine.
2. With the seat latched in the down position, install the two back nuts securing the seat frame to the seat isolator.
3. Tilt the seat forward.
4. Install the two front nuts securing the seat frame to the seat isolator.
5. Route seat switch harness through the seat frame. Connect the seat switch.
6. Drop the seat back down to the operator’s position.