Service Manual

Charge pump
31.Install piston(120), spring(122), collar(121)
into pump body(100). And install gasket(124)
and cover(123) onto pump body(100). And
install two bolts(125) into pump body(100).
[Fig.33] (Accumlator)
32.Install valve(112), spring(114), plug(113)
and O-ring(14) into pump body(100).
[Fig.34] (Charge relief valve)
33.Install valve(108), spring(110), plug(109)
and O-ring(14) into pump body(100).
[Fig.34] (Pressure valve)
34.Install valve(116), spring(117), plug(118)
and O-ring(39) into pump body(100).
[Fig.35] (Filter bypass valve)
*Put clean oil on the contact surfaces of valves.
*When installing, take care of the direction of
collar(121).
*Install bolts(125) while holding plate(123)
with your hand.
Fig.35
116 117
39 118
Tightening torque
24.5±2.5Nm
Fig.34
108 110
14 109
112
114
113
14
Tightening torque
24.5±2.5Nm
Tightening torque
24.5±2.5Nm
Fig.33
120
122 121
124
123 125
X2
Tightening torque
24.5±2.5Nm
11
take care of
the direction.