Service Manual

XL Lawn Tractor Service Manual 6 - 9

MOWER

9. Remove the bolts and lock nuts and pull the two

mower pivot mount brackets down from the front

axle (Figure 214).

Figure 214

m-4630

10. Remove the hairpin cotter and washer from the

end of the long rod (Figure 215). Slide the rod out

of the mower mount. Repeat this step on the

opposite side of the mower.

11. Remove the hairpin cotter and washer at the

mower leveling bracket (Figure 215). Slide the

bracket off the mounting pin. Reinstall the washer

and hairpin cotter for storage.

12. Rotate the leveling bracket up, toward the frame,

and hook the long rod into one of the holes to

store. Secure long rod with washer and hairpin

cotter. Repeat for opposite side of the mower.

13. Move the height-of-cut lever (deck lift) into the “D”

notch. Hook lift assist spring onto retaining bolt for

storage (Figure 212).

Figure 215

1805

(A) Pivot Mount Bracket

(B) Bolt 5/16-17 x 2-1/2”

(B) Long Rod

(D) Mower Mount