Service Manual

XL Lawn Tractor Service Manual 3 - 25
XL HYDROSTATIC TRANSAXLES
13. Adjust and tighten both the right and left engine
belt guides. They should be adjusted so they are
within 1/8” (3mm) of the engine pulley (Figure
152).
Figure 152
MVC-001b
14. Adjust and tighten the transaxle belt guide. Make
sure it is adjusted so it is within 1/8” (3mm) of the
transaxle pulley (Figure 153).
Figure 153
MVC-001e
15. Before installing the mower deck on the tractor,
check the routing of the drive belt (Figure 154).
Figure 154
MVC-0023
16. Install mower deck (refer to the "Mower" section
on page 6 - 1).
17. Install battery and battery tray. Reconnect the
battery cables and test the tractor, making sure all
safety devices are operating.
1/8” (3mm)