Service Manual

MOWER
A6-5XL Lawn Tractor Service Manual
4. Install the mower pivot mount brackets onto the front
axle with the bolts and locknuts (Fig. A6 009).
Fig A6 009 fi g. 37 m-4630
5. Move the height-of-cut lever into the D notch.
6. Remove the lift assist spring between the mower
right side lift bracket and the retaining bolt (Fig. A6
010).
Note: Use the spring tool provided with the
machine.
Fig A6 010 fi g. 35 m-1851
9. Install the thin washer and hairpin cotter to secure
the rod in place (Fig. A6 011).
10. Mount the slotted mower leveling bracket onto the
pin on the mower mount (Fig. A6 011).
11. Install the thick washer and hairpin cotter to secure
the mower (Fig. A6 011).
12. Repeat steps 8 through 11 on the opposite side of
the mower.
Fig A6 011 fi g. 38 1805
7. Move the height-of-cut lever into the A notch.
8. Slide the end of the long rod through the hole in the
mower mount (Fig. A6 011).
A. Bolts 5/16” x 2-1/2” C. Locknuts
B. Pivot mount brackets
A
B
C
A. Spring C. Spring tool
B. Bolt
A
B
C
A. Long rod D. Hairpin cotter and
B. Hairpin cotter and thick washer
thin washer E. Mower mount
C. Leveling bracket
A
B
D
C
E