Service Manual

MOWER

A6-3XL Lawn Tractor Service Manual

Fig A6 006 ﬁ g. 37 m-4630

8. Remove the bolts and lock nuts and pull the two

mower pivot mount brackets down from the front

axle (Fig. A6 006).

10. Remove the hairpin cotter and washer at the mower

leveling bracket (Fig. A6 007). Slide the bracket off

of themounting pin. Install the washer and hairpin

cotter for storage.

11. Rotate the leveling bracket up toward the frame,

and hook the long rod into one of the holes to store.

Secure the long rod with the washer and hairpin

cotter.

12. Repeat steps 9 through 11 on the opposite side of

the mower.

13. Move the height-of-cut lever into the “D” notch.

Hook the lift assist spring onto the retaining bolt for

storage (Fig. A6 004).

Fig A6 007 ﬁ g. 38 1805

Fig A6 005 ﬁ g. 36 m-8207

9. Remove the hairpin cotter and washer from the end

of the long rod (Fig. A6 007). Slide the rod out of the

mower mount.

6. Move the height-of-cut lever into the A notch.

7. Unhook the spring on the idler pulley arm from the

bracket on the mower (Fig. A6 005).

A. Eye–bolt C. Idler arm

B. Idler spring D. Idler pulley

A. Bolts 5/16” x 2-1/2” C. Locknuts

B. Pivot mount brackets

A. Long rod C. Leveling bracket

B. Hairpin cotter and D. Mower mount

washer