Service Manual

MOWER
A6-1XL Lawn Tractor Service Manual
4. If adjustment is needed, turn the adjustment nut
located on the brake rod to achieve .015” (.38 mm)
gap (Fig. A6 001).
Fig A6 001 belt guide
1. Lower the mower to the lowest height of cut position.
2. With the engine OFF, engage the mower (PTO)
lever.
3. Check the clearance between the brake pad on the
brake arm assembly and the mower drive pulley. It
should be set at .015” (.38mm) gap (Fig. A6 001).
32” Mower Brake Adjustment
32” Mower
A. Engine pulley E. Brake pad gap – .015”
B. Brake rod (.38mm)
C. Adjustment nut F. Mower pulley
D. Spring
A
B
C
D
E
F
4. If adjustment is needed, turn the adjustment nut
located on the brake rod to achieve .06” – .12”
(1.5mm – 3.0mm) gap.
Fig A6 002 38in deck
1. Lower the mower to the lowest height of cut position.
2. With the engine OFF, engage the mower (PTO)
lever.
3. Check the clearance between the brake pad on the
brake arm assembly and the mower drive pulley. It
should be set between .06” – .12” (1.5mm – 3.0mm)
away from the deck pulley (Fig. A6 002).
38” Mower Brake Adjustment
38” Mower with Manual PTO Clutch