Operator's Manual
Maintenance
Important:Beforeperforminganymaintenanceprocedures,rststopthemotor,wait5minutestoallowallmoving
partstocometoacompletestopandcool,andunplugthepowercord.
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Aftertherst10hours
•Checkthetensionofthedrivechain,andadjustitasneeded.
Aftertherst25hours
•Inspectthebeltsandadjustasnecessary.
Beforeeachuseordaily
•Inspectthetiresandwheels.
Aftereachuse
•Torquethelugnutsto108to122N-m(80to90ft-lb)aftertowing.
•Cleanthedrumbetweenmixingbatchesofmaterial.
•Lubricatethetrunnions.
•Cleanthemachine.
Every40hours
•Lubricatethedrivechainwithanon-stickychainlubricant.
•Inspectthebeltsandadjustasnecessary.
•Checktheclutchoperation.
Every50hours
•Checkthetensionofthedrivechain,andadjustitasneeded.
Every6,000hours
•Lubricatethemotorbearings.
Monthly
•Lubricatethepillow-blockbearings.
Every2years
•Replacethebelts.
Premaintenance
Procedures
PreparingtheMachinefor
Maintenance
1.Parkthemachineonalevelsurface.
2.Removethemachinefromthetowvehicle.
3.Chockthetires.
4.Opentherearcowl;referto
OpeningtheCowl(page
17).
5.Turnoffandunplugthemotor;refertoMotorOn/Off
Switch(page11)
.
6.Ensurethatthemotoriscool.
RemovingandInstallingthe
DividerPlate
Youneedtoremovethedividerplatetoprovideaccessbefore
performingsomemaintenanceprocedures.
RemovingtheDividerPlate
1.Unlatchandopenthecowl;refertoOpeningtheCowl
(page17).
2.Useawrenchtoremovethe4boltsthatsecurethe
dividerplatetothefrontcowl.
Note:Keeptheboltsforinstallingthedividerplate.
G021585
Figure30
3.Toremovethedividerplate,liftitupwardandrotateit
counterclockwisesothatitclearsvariouscomponents.
22