Service Manual

5. Install the high speed mixture (H) and idle mix-

ture (L) adjusting needles and springs.

Turn both needles clockwise until they are lightly

seated. Then turn the needles counterclockwise

the following number of turns:

High Speed Mixture Screw: 1-1/4 turns

Idle Mixture Screw: 1-1/4 turns

NOTE: Turn the high speed mixture and idle

mixture needles finger-tight. Do not force the

needles with a screwdriver as this can damage

the tips of the needles and the seats in the car-

buretor body.

Fuel Pump Side

1. Install the fuel pump diaphragm (next to carbu-

retor body) and gasket.

2. Install the fuel pump cover and cover screw.

Tighten the screw securely.

3. If necessary, install the idle speed adjusting

screw and spring.

Turn the adjusting screw clockwise until it just

touches the throttle lever; then continue turning

2 full turns.

DISASSEMBLE MAJOR

COMPONENTS (cont.)

2.6081.044

2.6081.043

2.6081.042

DISASSEMBLY, INSPECTION, & REPAIR

3-21