Service Manual

For Model 200/210 Blower— With the exhaust

port of cylinder to the left, position the edge of gas-

ket with the small notch to the left (nearest ex-

haust port)

4. Position the cylinder to the crankcase as

follows:

For Trimmers, Cultivators, and Models 280,

300BV, 310, And 310BV Blowers and

Blower/Vacs— Position the exhaust port of

cylinder so it is on the same side as the open side

of crankcase.

For Model 200/210 Blower— Position the

exhaust port of the cylinder so it is on the side op-

posite the hole in crankcase for the carburetor

mount/reed plate.

ENGINE REASSEMBY (cont.)

2.6089.111

2.6089.113

2.6089.112

Exhaust Port

Carb. Mount/

Reed Plate

Mounting Hole

REASSEMBLY

4-7