Operator's Manual

Failures caused by abuse, neglect, or improper maintenance are not covered. The use of add–on or
modified parts can be grounds for disallowing a warranty claim. The manufacturer is not liable to cover
failures of warranted parts caused by the use of add–on or modified parts. Toro is liable for damages to
other engine components caused by the failure of a warranted part still under warranty. The owner is
responsible for the performance of the required maintenance, as defined by the manufacturer in the written
instructions.
Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled
only for regular inspection to the effect of ”repair or replace as necessary” shall be warranted for the
warranty period. Any warranted part which is scheduled for replacement as required maintenance shall be
warranted for the period of time up to the first scheduled replacement point for that part. Coverage under
this warranty extends only to the parts listed below (the emissions system parts) to the extent that these
parts were present on the engine when purchased.
– Fuel Metering System
• Cold start enrichment system including the choke mechanism or priming system
• Fuel pump
• Air fuel ratio feed back system
• Carburetor and internal parts
• Fuel injection system
– Air Induction System
• Air cleaner
• Reed intake system
• Intake manifold
• Controlled hot air intake system
– Ignition System
• Spark plug(s)
• Ignition coils and electronics
• Advance/retard mechanisms
– Catalytic Converter/Thermal Reactor System
• Catalytic converter
• Thermal reactor
• Exhaust manifold
– Air Injection System
• Air injection system or pulse valve
• Valves affecting distribution of air
– Exhaust Gas Recirculation (EGR) System
• EGR valve body and piping system connecting to the intake side of the engine
• EGR control system
– Particulate Controls
• Traps filters, precipators and any other device used to capture particulate emissions
– Miscellaneous Items Used in the Above Systems
• Vacuum, temperature, and time sensitive valves and switches
• Electronic controls
• Hoses, connectors, and assemblies of same
How to Get Warranty Service:
Should you feel your TORO Product requires warranty service, contact the dealer who sold you the product
or any Authorized TORO Service Dealer or TORO Master Service Dealer. The Yellow Pages of your
telephone directory is a good reference source. The dealer will either arrange service at his/her dealership
or recommend another Authorized Service Dealer who may be more convenient. You may need proof of
purchase (copy of registration card, sales receipt, etc.) for warranty validation. The owner shall not be
charged for diagnostic labor which leads to the determination that a warranted part is defective, if the
diagnostic work is performed at a warranty station.