Operator's Manual

14
15
Attaching the Grass Deflector
Attaching the grass deector differs depending on the type
of trimmer: curved shaft or straight shaft.
WARNING:
The line cutting blade on the grass deector
is sharp. Avoid contact with the blade. Failure
to avoid contact can result in serious personal
injury.
Note: To protect the operator, always be sure to attach the
grass deector.
To Attach the Curved Shaft Grass Deflector
Model Nos. 51930B, 51950 & 51951
See Figure 5.
Follow these steps to attach the curved shaft grass deector.
1. Press the grass deector onto the bottom of the curved
shaft as shown.
2. Lift the grass barrier up slightly.
3. Insert the hex head cap screw through the grass deec-
tor, bracket, and grass barrier.
4. Place the at washer and lock washer on the hex head
cap screw.
5. Place the wing nut or hex nut on the hex head cap screw
and turn clockwise to secure.
Figure 5
3. Align the screw hole in the mounting bracket with the
screw hole in the grass deector.
4. Insert the slotted hex head screw through the mounting
bracket and into the grass deector.
5. Tighten the screw securely.
Figure 6
To Attach the Straight Shaft Grass Deflector
Model Nos. 51932B, 51970 & 51971 and Model
Nos. 51934B, 51990 & 51991
See Figure 6.
Follow these steps to attach the straight shaft grass deector.
1. Remove the slotted hex head screw from the grass
deector.
2. Insert the tab on the mounting bracket in the slot on the
grass deector.
Assembly
Curved Shaft
Grass Deflector
Wing
Nut
Straight Shaft
Grass Deflector
Line
Cutting
Blade
Hex
Nut
Lock
Washer
Hex Head
Cap Screw
Flat
Washer
Grass
Barrier
Tab
Slot
Bracket